High- field-effect transistor with copper-phthalocyanine

Abstract

The use of SrTiO3 dielectrics as high-permittivity insulator in organic thin film field effect transistors (FET) is evaluated. Field-effect transistors with sputtered SrTiO3 and copper-phthalocyanine (CuPc) as semiconducting layer were fabricated. The device preparation was performed in-situ in an ultra high vacuum chamber system. The dielectric in the transistors had a permittivity of up to 200 which led to low driving voltages of 3 V. The field effect transistors were p-type and reached mobilities of about μ = 1.5× 10-3 cm2/Vs and an on/off ratio of 103. These properties are compared to devices based on other dielectric materials.

0

Turn this paper into a lesson

ArcXiv compiles a structured reading guide from this paper's metadata: plain-English importance, contributions, prerequisite concepts, which sections to read first, flashcards, and a quiz. Grounded in the abstract, never invented.

Discussion (0)

Sign in to join the discussion.

Loading comments…