Intrinsic Carrier Losses in Tellurium Due to Radiative and Auger Recombinations

Abstract

Fully microscopic many-body models based on inputs from first principle density functional theory are used to calculate the carrier losses due to radiative- and Auger-recombinations in bulk tellurium. It is shown that Auger processes dominate the losses for carrier densities in the range typical for applications as lasers. The Auger loss depends crucially on the energetic position of the H6 valence bands. At cryogenic temperatures of 50\,K (100\,K) the Auger coefficient, C, varies by about six (three) orders of magnitude within the range of published distances between these bands and the valence bandedge. Values for C at the high and low end of these ranges are found if the distance is smaller or larger than the bandgap, respectively. At room temperature the sensitivity is reduced to about a factor of four with C values ranging between 0.4 and 1.6× 10-27cm6s-1. Here, radiative losses dominate for carrier densities up to about 1016/cm3 with a loss coefficient B≈ 10-11cm3s-1. The radiative losses are about two to three times lower than in typical bulk III-V materials for comparable wavelengths.

0

Turn this paper into a lesson

ArcXiv compiles a structured reading guide from this paper's metadata: plain-English importance, contributions, prerequisite concepts, which sections to read first, flashcards, and a quiz. Grounded in the abstract, never invented.

Discussion (0)

Sign in to join the discussion.

Loading comments…