Simulation Study on Super-Resolution for Coded Aperture Gamma Imaging

Abstract

Coded Aperture Imaging (CAI) has been proposed as an alternative collimation technique in nuclear imaging. To maximize spatial resolution small pinholes in the coded aperture mask are required. However, a high-resolution detector is needed to correctly sample the point spread function (PSF) to keep the Nyquist-Shannon sampling theorem satisfied. The disadvantage of smaller pixels, though, is the resulting higher Poisson noise. Thus, the aim of this paper was to investigate if sufficiently accurate CAI reconstruction is achievable with a detector which undersamples the PSF. With the Monte Carlo simulation framework TOPAS a test image with multiple spheres of different diameter was simulated based on the setup of an experimental gamma camera from previous work. Additionally, measured phantom data were acquired. The captured detector images were converted to low-resolution images of different pixel sizes according to the super-resolution factor $k$. Multiple analytical reconstruction methods and a Machine Learning approach were compared based on the contrast-to-noise ratio (CNR). We show, that all reconstruction methods are able to reconstruct both the test image and the measured phantom data for $k \leq 7$. With a synthetic high-resolution PSF and upsampling the simulated low-resolution detector image by bilinear interpolation the CNR can be kept approximately constant. Results of this simulation study and additional validation on measured phantom data indicate that an undersampling detector can be combined with small aperture holes. However, further experiments need to be conducted.