Thermalization of neighboring nanomechanical resonators below 1 mK

Abstract

The position noise spectra of six drums on a single chip were measured on a single cooldown below 1.3 kelvin. Cryostat temperatures as low as 0.7 mK were achieved. The temperature dependence of the resonance frequency and linewidth of the drum modes was analyzed in the framework of the tunneling two level system (TLS) model. Departures of the resonance frequency and the position noise power from the expected logarithmic and linear temperature dependences, respectively, were interpreted as indications of thermal decoupling from the cryostat. This previously unexplored measurement configuration revealed that similar neighboring drums on a single chip may be at different temperatures. At the lowest temperatures, some drums exhibited excess damping that decreased with temperature. The magnitude of the excess damping of the drums was correlated with the thermal coupling of their TLS to the cryostat. In the case of one drum, a temporary increase in its damping coincided with a decrease in its mode temperature. The thermalization of the TLS to the cold finger was independent of pump power, pulse tube state and temperature of the pre-cooling stages of the cryostat. These results reveal an interplay between TLS damping and thermalization of nanomechanics that motivates further theoretical work and may impact efforts to extend the coherence of mechanical resonators.

0

Turn this paper into a lesson

ArcXiv compiles a structured reading guide from this paper's metadata: plain-English importance, contributions, prerequisite concepts, which sections to read first, flashcards, and a quiz. Grounded in the abstract, never invented.

Discussion (0)

Sign in to join the discussion.

Loading comments…