Temperature Dependent Characteristics of Quasi-vertical AlN Schottky Diodes on Bulk AlN Substrate
Abstract
We report on the fabrication and temperature-dependent characterization of MOCVD-grown quasi-vertical AlN Schottky barrier diodes (SBDs) on bulk AlN substrates. The SBDs exhibited high current densities exceeding 2 kA/cm2 at 10 V, with a turn-on voltage of ~3.0 V (at 1 A/cm2) and an on/off ratio >109 at room temperature. Stable rectifying operation was maintained up to 300 C (the highest measured temperature), with a pronounced increase in current density at elevated temperatures due to thermally activated carrier transport, accompanied by an increase in extracted Schottky barrier height and a reduction in ideality factor. Capacitance voltage measurements showed strong temperature dependence due to the deep donor nature of Si in AlN, resulting in an increase in the net donor concentration (ND-NA) from ~5x1017 cm-3 at 300 K to ~1x1018 cm-3 at 373 K. Temperature-dependent reverse-bias characteristics were consistent with Poole-Frenkel emission as the dominant leakage mechanism, with an estimated trap energy of ~0.34 eV. Characterization using transmission electron microscopy and energy-dispersive X-ray spectroscopy revealed a ~5 nm AlNxOy interfacial layer at the metal/semiconductor junction, which likely influences both forward and reverse transport. These results provide insight into carrier transport, leakage mechanisms, interface chemistry, and high-temperature characteristics, and guidance for the future development of high-performance AlN power devices.
Turn this paper into a lesson
ArcXiv compiles a structured reading guide from this paper's metadata: plain-English importance, contributions, prerequisite concepts, which sections to read first, flashcards, and a quiz. Grounded in the abstract, never invented.