Study of Silicon Pixel Sensors for Synchrotron Radiation Detection
Abstract
Hybrid pixel single-photon-counting detectors have been successfully employed and widely used in Synchrotron radiation X-ray detection. In this paper, the silicon pixel sensors for single X-ray photon detection, which operate in full-depletion mode have been studied. The pixel sensors were fabricated on 4-inch, N type, 320μm thick, high-resistivity silicon wafers. The pixel sensors has a p+-in-n structure with varies of pixel size and gap size including guard-ring structures. Later, the pixel sensor was wire bonded to the ASIC circuits and tested for the performance of X-ray response in the synchrotron beam line (BSRF, 1W2B). From the S-curve scan, we could get the energy resolution and the linear properties between input energy and the equivalent generator amplitude. The pixel sensors we fabricated have a good energy linear and high count rate depending on the ASIC readout circuit. We get the 20% energy resolution above 10 keV photon energy via wire bonding. The energy resolution would get better if we bond the sensor via indium ball for the smaller stray capacitance.
Turn this paper into a lesson
ArcXiv compiles a structured reading guide from this paper's metadata: plain-English importance, contributions, prerequisite concepts, which sections to read first, flashcards, and a quiz. Grounded in the abstract, never invented.