Development of a technology for manufacturing a heat-shielding structure on nitrogen cryocontainers, excluding heat transfer through gas

Abstract

One of the important stages in the creation of the scientific and technical foundations for the calculation, design and manufacturing technology of the lowest heat-conductivity thermal protection from screen-vacuum thermal insulation (SVTI) is the development of a process for achieving the optimal vacuum in the SVTI layers, since at this pressure, thermal conductivity through the SVTI is carried out only due to the radiant and contact-conductive components. It is proposed to obtain such a pressure in thermal insulation by using cushioning material in it, which was previously degassed in a separate vacuum chamber at 370-380 K for 12 hours in order to remove water molecules from its structure and then replace them with dry nitrogen molecules. These molecules have 3-4 times less heat of adsorption; therefore they are pumped out faster. As a result, it becomes possible to accelerate (by 20 hours) to achieve optimal vacuum in thermal insulation, as well as 11% lower effective thermal conductivity. The analysis carried out (according to the developed methodology) showed that the achieved optimal effective thermal conductivity of thermal insulation in a cryocontainers is determined by 33% of radiant thermal conductivity and 67% of the contact-conductive component.