Experimental Characterization of Additively Manufactured Metallic Alloys for Electric Propulsion Applications

Abstract

This work explores the sputtering of additively manufactured (AM) materials for use in gridded ion source applications. The first part of the paper uses 316L stainless steel as an example to demonstrate that additively manufactured material does not exhibit adverse sputtering behavior, such as higher sputter yield, compared with conventionally manufactured material. To this end, three additively manufactured 316L stainless steel samples were exposed to the beam of a KDC-40 electrostatic gridded ion source at three distinct energy levels of 400, 600, and 800 eV on each side of the sample for a duration of one hour. The samples were masked to create a distinct boundary between treated and untreated regions, identifiable using profilometry, and were biased to -18V for testing. Samples were then examined using a Bruker optical profilometer and further processed using the open-source software Gwyddion to evaluate the sputtering yield. The sputter yield varied in the range 0.2-2 atoms/ion for 400-800 eV ions and increased with ion energy. The measured sputtering yield was fairly consistent with predictions from analytical models developed in prior literature, while exhibiting some variations potentially due to added effects of increased temperature and oxide layers. The second part of the paper demonstrates feasibility of using an additively manufactured tungsten-rhenium grids in existing KDC-40 electrostatic gridded ion source.