Addressing the low-wind effect with the Lyot-based low-order wavefront sensor on SCExAO

Abstract

The Low-Wind Effect (LWE) is a well-known issue that affects the coronagraphic capabilities of instruments optimized to take direct images of exoplanets. This effect is prominent in segmented and obstructed pupils with spider arms, causing differential pistons due to phase discontinuities and, in some cases, tip-tilt errors under low-wind conditions. LWE-induced low-order errors contribute to coronagraphic leakage and reduce the exoplanet detection sensitivity of direct imaging instruments. Solutions to mitigate the impact of LWE have been developed in both passive mode, such as coating the spider arms with low-emissivity material, and active mode using wavefront sensors (WFS). The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument at the Subaru Telescope also attempted to mitigate LWE by testing several dedicated WFS. Such techniques, when tested on SCExAO, have proven their ability to measure and correct LWE; however, most remain incompatible with SCExAO's coronagraphic imaging modes. Addressing the need for an efficient solution that can correct LWE in coronagraphic observing modes, we revisited the coronagraphic WFS on SCExAO, known as the Lyot-based Low-order Wavefront Sensor (LLOWFS). LLOWFS utilizes the unused starlight reflected off the Lyot stop and is a well-proven technique that can prevent coronagraphic leaks by sensing low-order errors in a re-imaged focal plane or pupil plane downstream of the focal plane mask. We present the machine-learned LLOWFS's initial on-sky measurement and control of the differential piston aberrations induced by the LWE downstream of a Lyot coronagraph in SCExAO's infrared arm. Preliminary LLOWFS corrections of LWE in the coronagraphic mode are encouraging and would leverage future high-contrast performance of SCExAO, enabling the detection of mature exoplanets at small angular separations.