Influence of dislocation density on the tribological response in oxides: case study on SrTiO3

Abstract

Most ceramics suffer from brittle surface damage and cracking when small particles slide across the surface under low load. Microscratching tests are a useful technique to mimic this loading scenario while retaining the material's deformation history; however, the impact of pre-seeded dislocations, which can significantly facilitate plastic deformation, has not been explored in ceramics. Here, the influence of mechanically seeded dislocations on the microscratching response of oxides is investigated using a model perovskite, SrTiO3. First, various dislocation densities over four orders of magnitude are introduced via room-temperature cyclic Brinell indenter scratching. Subsequently, load-ramped microscratching tests are performed within the pristine and dislocation-seeded regions using a nominally 30 μm spherical diamond tip. On the reference pristine surface, we observe a clear transition from elastic to elasto-plastic deformation, followed by median/radial cracking at higher loads. In contrast, pre-seeded dislocations, accompanied by residual compressive stresses, suppress elastic deformation and lead to median/radial crack shortening and subsequent transition to a partial cone crack. The subsurface cracks are characterized by 3D Nano-CT. The changes in crack geometry, with and without dislocations, were described using the Lawn-Evans-Marshall and Lawn-Wiederhorn-Roberts models. These findings provide direct evidence of dislocation-regulated near-surface damage tolerance, with general applicability to other plastically deformable oxides.