Phase-field simulation of interfacial stability in structured gas-liquid contactors: design rules for gas diffusion electrodes

Abstract

Many process engineering applications hold a gas-liquid interface stationary inside a structured solid by a controlled pressure difference. Gas diffusion electrodes (GDEs) are one such case, where the interface separates the liquid electrolyte from the gaseous reactant. Maintaining it is particularly challenging in organic electrosynthesis, where low surface tensions lower the admissible pressures throughout and small contact angles leave the electrode with little margin against flooding. Here, we quantify how the shape, wettability, and three-dimensional topology of a structured medium set this window, using phase-field simulations of the Cahn-Hilliard-Navier-Stokes equations. Each geometry is characterised by its Laplace pressure curve, which yields both the maximum admissible pressure difference and the stiffness of the interface against pressure fluctuations. For single flat orifices at constant open area, elongating the opening from an aspect ratio of one to six raises the admissible pressure difference by 40 % and the stiffness by a factor of 3.3. Comparison with slits of equal width shows that this gain originates entirely from the reduced opening width. Sheared, diamond shaped openings are markedly less effective. In woven meshes, the wettability displaces the operating window several times as far as it stretches it. A less wetting surface therefore buys flooding margin largely at the expense of breakthrough margin, whereas the geometric route, established here for flat openings, widens the window itself. From these results we derive design rules for structured gas-liquid contactors and improved GDE architectures for organic electrosynthesis.