Experimental Investigation of Heat Transfer in Axisymmetric Open Cavities at Hypersonic Speeds
T. V. Krishna, J. Cohen, S. K. Karthick, Soumya R. Nanda
Abstract
An experimental investigation was conducted to characterize the heat-transfer behavior of an axisymmetric cavity mounted on a cone with a semi-apex angle of (48 ) under Mach 6 freestream conditions in a Ludwieg tunnel. The effects of cavity geometry, represented by the length-to-depth ratio (L/D = 0.5, 1.0, 2.0, 4.0, and 6.0), rear-wall height-to-depth ratio (h/D = -0.25, 0, and 0.5), and Reynolds number (ReD = 23000 - 74000) were systematically investigated. Flow-field characteristics and surface heat-transfer behavior were examined using schlieren and planar laser Rayleigh scattering visualization techniques, together with surface pressure and heat-transfer measurements. The results indicate that increasing the cavity length-to-depth ratio leads to a reduction in the downstream Stanton number (Std). For the longest cavity L/D = 6, however, the downstream Stanton number was found to exceed the upstream value (Stu) indicating enhanced heat transfer in the region downstream of the cavity.
Create a lesson
Related papers
Lagrangian transport driven by travelling waves in a radially deforming circular cavity
Zijian Liu, Julian Olszewski, Jie Xu
Flux-induced condensation in a radial geometry
Yoav Tsori
Theory of magneto-electrokinetics in unidirectional electrolyte flow: Hydrodynamic potential and Hall effect
Yoav Tsori
Influence of an oxide cap on the combustion of aluminum particles using boundary-layer resolved simulations
Hesheng Bao, Hongchao Chu, Shibam Bose et al.
Swimming formula in a linearly viscous fluid with anisotropic and odd viscosity tensors at low Reynolds number
Yuto Hosaka, Kenta Ishimoto
Bifurcation analysis of particulate Rayleigh-Benard convection
Thota Srinivas