Wire Scanners for Small Emittance Beam Measurement in Atf
H. Hayano
Abstract
The wire scanners are used for a measurement of the very small beam size and the emittance in Accelerator Test Facility (ATF). They are installed in the extraction beam line of ATF damping ring. The extracted beam emittance are ex=1.3x10-9 m.rad, ey=1.7x10-11 m.rad with 2x109 electrons/bunch intensity and 1.3GeV energy. The wire scanners scan the beam by a tungsten wire with beam repetition 0.78Hz. The scanning speed is, however, very slow(~500um/sec). Since the extracted beam is quite stable by using the double kicker system, precision of the size measurement is less than 2um for 50 - 150um horizontal beam size and 0.3um for 8 - 16um vertical beam size. The detail of the system and the performance are described.
Create a lesson
Related papers
Single-pass stochastic cooling for electron microscopy
River Robles, Peter Hommelhoff
Impact of Rapid Acceleration on Beam Dynamics in the Rapid-Cycling Synchrotrons of a Muon Collider
Lisa Soubirou, Antoine Chancé
LADA: A differential algebra-based simulation package for arbitrary-order charged-particle and light optics
Dmitry Varentsov, Sergey Litvinov, Maksym Miski-Oglu et al.
Transverse Confinement in Cascaded Inverse-Cherenkov Acceleration via Phase-Trajectory Control and Injection Matching
Yuanhao Liu, Nanshun Huang, Xionghao Yuan et al.
OPALX: A performance-portable framework for particle accelerator simulations
Michail Zampetakis, Ryan Sean Ammann, Yuanjie Bi et al.
Intrabeam scattering of chirped electron bunches with non-Gaussian longitudinal distributions and slice mismatch
Xiuji Chen, Wencai Cheng, Si Chen et al.