A Real-Time Energy Monitor System for the IPNS Linac

Abstract

Injected beam energy and energy spread are critical parameters affecting the performance of our rapid cycling synchrotron (RCS). A real-time energy monitoring system is being installed to examine the H- beam out of the Intense Pulsed Neutron Source (IPNS) 50 MeV linac. The 200 MHz Alvarez linac serves as the injector for the 450 MeV IPNS RCS. The linac provides an 80 ms macropulse of approximately 3x1012 H- ions 30 times per second for coasting-beam injection into the RCS. The RCS delivers protons to a heavy-metal spallation neutron target for material science studies. Using a number of strip-line beam position monitors (BPMs) distributed along the 50 MeV transport line from the linac to the RCS, fast signals from the strip lines are digitized and transferred to a computer which performs an FFT. Corrections for cable attenuation and oscilloscope bandwidth are made in the frequency domain. Rectangular pulse train phasing (RPTP) is imposed on the spectra prior to obtaining the inverse transform (IFFT). After the IFFT, the reconstructed time-domain signal is analyzed for pulse width as it progresses along the transport line. Time-of-flight measurements of the BPM signals provide beam energy. Finally, using the 3-size measurement technique, the longitudinal emittance and energy spread of the beam are determined.