Off-axis MgB2 films using an in situ annealing pulsed laser deposition method

Abstract

Highly smooth and c-axis oriented superconducting MgB2 thin films were prepared by pulsed laser deposition (PLD) with off-axis geometry. The films were deposited on Al2O3-C substrates perpendicularly aligned to a stoichiometric MgB2 target in a 120 mTorr high purity Ar background gas. An in situ annealing was carried out at 650C for 1 min in a 760 Torr Ar atmosphere. Despite the short annealing time, an x-ray theta-2 theta scan shows fairly good crystallization, according to the clear c-axis oriented peaks for the films. Both atomic force microscopy and the x-ray diffraction results indicate that the crystallite size is less than 50nm. The root mean square roughness of our off-axis film is ~4 nm in a 5x5 square micron area. The Tc onset value of the best off-axis film reaches 33.1 K with a narrow transition width of 0.9 K. The films showed no anisotropy in Hc2-T curves when parallel and perpendicular fields were applied. The slope of Hc2-T curves in low field regime is 1 T/K, which is among the highest reported values.

0

Turn this paper into a full lesson

ArcXiv compiles a staged curriculum from this paper: 8-12 lessons across beginner → advanced, synthesised section guides, visuals, flashcards, a quiz, exercises, and on-demand deep dives per section. Grounded in the abstract, never invented.

Discussion (0)

Sign in to join the discussion.

Loading comments…