November 2007 arXiv papers — page 18

Ivan Berlocher, Hyun-Gue Huh, Eric Laporte, Jee-Sun Nam

This article describes an exclusively resource-based method of morphological annotation of written Korean text. Korean is an agglutinative language. Our annotator is designed to process text before the operation of a syntactic parser. In its present state, it annotates one-stem words only. The output is a graph of morphemes annotated with accurate linguistic

Laura Tolos, Angels Ramos, Tetsuro Mizutani

A self-consistent coupled-channel approach is used to study the properties of $D$ and $\bar D$ mesons in hot dense matter. The starting point is a broken SU(4) s-wave Tomozawa-Weinberg $DN$ ($\bar DN$) interaction supplemented by an attractive isoscalar-scalar term. The Pauli blocking effects, baryon mean-field bindings, and $π$ and open-charm meson self-ene

W. Schoenell, M. Cervino, R. Cid Fernandes, A. Mateus

We present here the VO access to the results of an analysis of the spectra of Sloan Digital Sky Survey (SDSS) galaxies performed with the STARLIGHT code by Cid Fernandes et al. (2005). The results include for each galaxy the original SDSS spectrum, the best-fit synthetic spectrum, the star formation history, the pure emission line spectrum corrected from und

Abdelkader Yanallah, Mohammed Brahim Zahaf

New nonlinear connection formulae of the q-orthogonal polynomials, such continuous q-Laguerre, continuous big q-Hermite, q-Meixner-Pollaczek and q-Gegenbauer polynomials, in terms of their respective classical analogues are obtained using a special realization of the q-exponential function as infinite multiplicative series of ordinary exponential function.

Chiara Menotti, Maciej Lewenstein

We present a concise review of the physics of ultra-cold dipolar gases, based mainly on the theoretical developments in our own group. First, we discuss shortly weakly interacting ultra-cold trapped dipolar gases. Dipolar Bose-Einstein condensates exhibit non-standard instabilities and the physics of both Bose and Fermi dipolar gases depends on the trap geom

Dongho Chae

We prove new \emph{a priori} estimates for the 3D Euler, the 3D Navier-Stokes and the 2D quasi-geostrophic equations by the method of similarity transforms.

Eduardo Zambrano, Alfredo M Ozorio de Almeida

The semiclassical Wigner function for a Bohr-quantized energy eigenstate is known to have a caustic along the corresponding classical closed phase space curve in the case of a single degree of freedom. Its Fourier transform, the semiclassical chord function, also has a caustic along the conjugate curve defined as the locus of diameters, i.e. the maximal chor

Irene Drelichman, Ricardo G. Durán

In this paper we prove that if $Ω\in\mathbb{R}^n$ is a bounded John domain, the following weighted Poincare-type inequality holds: $$ \inf_{a\in \mathbb{R}}\| (f(x)-a) w_1(x) \|_{L^q(Ω)} \le C \|\nabla f(x) d(x)^αw_2(x) \|_{L^p(Ω)} $$ where $f$ is a locally Lipschitz function on $Ω$, $d(x)$ denotes the distance of $x$ to the boundary of $Ω$, the weights $w_1

F. Ambrosino, A. Antonelli, E. Capitolo, P. S. Cooper

The P326 experiment at the CERN SPS has been proposed with the purpose of measuring the branching ratio for the decay K^+ \to π^+ ν\barν to within 10%. The photon veto system must provide a rejection factor of 10^8 for π^0 decays. We have explored two designs for the large-angle veto detectors, one based on scintillating tiles and the other using scintillati

M. Ciminale, R. Gatto, N. D. Ippolito, G. Nardulli

We study the phase diagram of the three flavor Polyakov-Nambu-Jona Lasinio (PNJL) model and in particular the interplay between chiral symmetry restoration and deconfinement crossover. We compute chiral condensates, quark densities and the Polyakov loop at several values of temperature and chemical potential. Moreover we investigate on the role of the Polyak

Corinne Charbonnel, Jean-Paul Zahn

To reconcile the measurements of 3He/H in Galactic HII regions with high values of 3He in a couple of planetary nebulae, we propose that thermohaline mixing is inhibited by a fossil magnetic field in red giant stars that are descendants of Ap stars. We examine the effect of a magnetic field on the salt-finger instability, using a local analysis. We obtain a

Pierre M. Pizzochero

We investigate when the energy that pins a superfluid vortex to the lattice of nuclei in the inner crust of neutron stars can be approximated by the energy that binds the vortex to a single nucleus. Indeed, although the pinning energy is the quantity relevant to the theory of pulsar glitches, so far full quantum calculations have been possible only for the b

Jesper Lykke Jacobsen, Hubert Saleur

By relating the ground state of Temperley-Lieb hamiltonians to partition functions of 2D statistical mechanics systems on a half plane, and using a boundary Coulomb gas formalism, we obtain in closed form the valence bond entanglement entropy as well as the valence bond probability distribution in these ground states. We find in particular that for the XXX s

Antonio Bernini, Luca Ferrari, Renzo Pinzani

The method we have applied in "A. Bernini, L. Ferrari, R. Pinzani, Enumerating permutations avoiding three Babson-Steingrimsson patterns, Ann. Comb. 9 (2005), 137--162" to count pattern avoiding permutations is adapted to words. As an application, we enumerate several classes of words simultaneously avoiding two generalized patterns of length 3.

William Y. C. Chen, Peter Paule, Husam L. Saad

Given two polynomials, we find a convergence property of the GCD of the rising factorial and the falling factorial. Based on this property, we present a unified approach to computing the universal denominators as given by Gosper's algorithm and Abramov's algorithm for finding rational solutions to linear difference equations with polynomial coefficie

Zhanyuan Hou

For autonomous Lotka-Volterra systems of differential equations modelling the dynamics of n competing species, new criteria are established for the existence of a single point global attractor. Under the conditions of these criteria, some of the species will survive and stabilise at a steady state whereas the others, if any, will die out.

V Janis, A. Klic, M. Ringel

We study hierarchies of replica-symmetry-breaking solutions of the Sherrington-Kirkpatrick model. Stationarity equations for order parameters of solutions with an arbitrary number of hierarchies are set and the limit to infinite number of hierarchical levels is discussed. In particular, we demonstrate how the continuous replica-symmetry breaking scheme of Pa

M. Winkelnkemper, R. Seguin, S. Rodt, A. Schliwa

We present a study of the polarization properties of emission lines from single InGaN/GaN quantum dots (QDs). The QDs, formed by spinodal decomposition within ultra-thin InGaN quantum wells, are investigated using single-QD cathodoluminescence (CL). The emission lines exhibit a systematic linear polarization in the orthogonal crystal directions [1 1 -2 0] an

Yuan Li, You-Quan Li

We show that the efficiency of manipulating electron spin in semiconductor quantum wells can be enhanced by tuning the strain strength. The effect combining intrinsic and strain-induced spin splitting varies for different systems, which provides an alternative route to understand the experimental phenomena brought in by the strain. The types of spin splittin

Loredana Afanasiev, Torsten Grust, Maarten Marx, Jan Rittinger

We introduce a controlled form of recursion in XQuery, inflationary fixed points, familiar in the context of relational databases. This imposes restrictions on the expressible types of recursion, but we show that inflationary fixed points nevertheless are sufficiently versatile to capture a wide range of interesting use cases, including the semantics of Regu

Kevin Goldstein, Hossein Yavartanoo

We examine four dimensional magnetically charged extremal black holes in certain non-linear U(1) gauge theories coupled to two derivative gravity. For a given coupling, one can tune the magnetic charge (or vice versa) so that the curvature singularity at the centre of the space-time is cancelled. Since these solutions have a horizon but no singularity, they

Marisa García-Vargas, Mercedes Mollá, Alessandro Bressan, Pedro Gómez-Alvarez

We present a new set of theoretical evolutionary synthesis models, PopStar. This grid of Single Stellar Populations covers a wide range in both, age and metallicity. The models use the most recent evolutionary tracks together with the use of new NLTE atmosphere models for the hot stars (O, B, WR, post-AGB stars, planetary nebulae) that dominate the stellar c

M. G. Pala, B. Hackens, F. Martins, H. Sellier

We study the relationship between the local density of states (LDOS) and the conductance variation $ΔG$ in scanning-gate-microscopy experiments on mesoscopic structures as a charged tip scans above the sample surface. We present an analytical model showing that in the linear-response regime the conductance shift $ΔG$ is proportional to the Hilbert transform

Christian Fuchs

The nuclear equation of state (EoS) at high densities and/or extreme isospin is one of the longstanding problems of nuclear physics. In the last years substantial progress has been made to constrain the EoS both, from the astrophysical side and from accelerator based experiments. Heavy ion experiments support a soft EoS at moderate densities while the possib

J. Bleibel, G. Burau, C. Fuchs

We present predictions for the pseudorapidity dependence of the azimuthal anisotropy parameters v_1 and v_2 of baryons and inclusive charged hadrons in Pb+Pb collisions at a LHC energy of sqrt(s) = 5.5 TeV applying a microscopic transport model, namely the quark gluon string model (QGSM) which has been recently extended for parton rearrangement and fusion pr

R. Cluckers

We prove the remaining part of the conjecture by Denef and Sperber [Denef, J. and Sperber, S., \textit{Exponential sums mod $p^n$ and {N}ewton polyhedra}, Bull. Belg. Math. Soc., {\bf{suppl.}} (2001) 55-63] on nondegenerate local exponential sums modulo $p^m$. We generalize Igusa's conjecture of the introduction of [Igusa, J., \textit{Lectures on forms o

P. Rahkila

Grain is a data analysis framework developed to be used with the novel Total Data Readout data acquisition system. In Total Data Readout all the electronics channels are read out asynchronously in singles mode and each data item is timestamped. Event building and analysis has to be done entirely in the software post-processing the data stream. A flexible and

Kingman Cheung, Chong Sheng Li, Tzu-Chiang Yuan

The decay of the standard model Higgs boson into a single photon and a vector unparticle through a one-loop process is studied. For an intermediate mass Higgs boson, this single photon plus unparticle mode can have a branching ratio comparable with the two-photon discovery mode. The emitted photon has a continuous energy spectrum encoding the nature of the r

Vladimir Zverev, Boris Rubinstein

We consider transformations of deterministic and random signals governed by simple dynamical mappings. It is shown that the resulting signal can be a random process described in terms of fractal distributions and fractal domain integrals. In typical cases a steady state satisfies a dilatation equation, relating an unknown function $f(x)$ to $f(κx)$ (for exam

Vieri Benci, Donato Fortunato

Abelian gauge theories consist of a class of field equations which provide a model for the interaction between matter and electromagnetic fields. In this paper we analyze the existence of solitary waves for these theories. We assume that the lower order term W is positive and we prove the existence of solitary waves if the coupling between matter and electro

Adrian Tanasa

We consider here the Feynman amplitudes of renormalizable non-commutative quantum field theory models. Different representations (the parametric and the Mellin one) are presented. The latter further allows the proof of meromorphy of a amplitude in the space-time dimension.

S. Naka, A. Kinouchi, H. Toyoda

In the usual approach to q-deformed gauge theories, the gauge fields are required to be non-local or non-commutative one's. If we introduce, however, an extended product, which we call `` $\star$-product\rq\rq, among the generators of a q-deformed Lie group, the deformed group can be reduced to a ordinary Lie group under the $\star$-product. According to

Vieri Benci, Donato Fortunato

In this paper we consider an Abelian Gauge Theory in R^4 equipped with the Minkowski metric. This theory leads to a system of equations, the Klein-Gordon-Maxwell equations, which provide models for the interaction between the electromagnetic field and matter. A three dimensional vortex is a finite energy solution of these equations in which the magnetic fiel

T. Tatsumi

A possibility and properties of spontaneous magnetization in quark matter are investigated. Magnetic susceptibility is evaluated within Fermi liquid theory, taking into account of the screening effect of gluons. Spin wave in the polarized quark matter, as the Nambu-Goldstone mode, is formulated by way of the coherent-state path integral.

Martin Jilek

We investigate spectral properties of a quantum particle confined to an infinite straight planar strip by imposing Robin boundary conditions with variable coupling. Assuming that the coupling function tends to a constant at infinity, we localize the essential spectrum and derive a sufficient condition which guarantees the existence of bound states. Further p

F. Martins, S. Gillessen, F. Eisenhauer, R. Genzel

We analyze the properties of the star S2 orbiting the supermassive black hole at the center of the Galaxy. A high quality SINFONI H and K band spectrum obtained from coadding 23.5 hours of observation between 2004 and 2007 reveals that S2 is an early B dwarf (B0-2.5V). Using model atmospheres, we constrain its stellar and wind properties. We show that S2 is

Arnaud Gloter, Marc Hoffmann

We estimate the Hurst parameter $H$ of a fractional Brownian motion from discrete noisy data observed along a high frequency sampling scheme. The presence of systematic experimental noise makes recovery of $H$ more difficult since relevant information is mostly contained in the high frequencies of the signal. We quantify the difficulty of the statistical pro

Titus S. van Erp

Due to the time scale problem, rare events are not accessible by straight forward molecular dynamics. The presence of multiple reaction channels complicates the problem even further. The feasibility of the standard free energy based methods relies strongly on the success in finding a proper reaction coordinate. This can be very difficult task in high-dimensi

J. M. Flynn, J. Nieves

Omnes dispersion relations make a connection between form factors for exclusive semileptonic decays and phase shifts in the corresponding elastic scattering channels. We describe two applications. In the first, we use lattice form factor calculations to learn about phase shifts in elastic s-wave isospin-1/2 channels for K pi, B pi, D pi and D K scattering. T

Rabindra Nath Das, Rasajit Bera

In this paper, the new forms obtained for Chandrasekhar's H- function in Radiative Transfer by one of the authors both for non-conservative and conservative cases for isotropic scattering in a semi-infinite plane parallel atmosphere are used to obtain exclusively new forms for the first and second derivatives of H-function . The numerics for evaluation o

M. Hosseini, G. Zhu, Y. -A. Peter

Fringing field has to be taken into account in the formulation of electrostatic parallel-plate actuators when the gap separating the electrodes is comparable to the geometrical dimensions of the moving plate. Even in this case, the existing formulations often result in complicated mathematical models from which it is difficult to determine the deflection of

Chao-Heng Chien, Hui-Min Yu

In MEMS technology, most of the devices are fabricated on glass or silicon substrate. However, this research presents a novel manufacture method that is derived from conventional hot embossing technology to fabricate the electrostatic switches on polymer material. The procedures of fabrication involve the metal deposition, photolithography, electroplating, h

S. -H. Ng, Z. -F. Wang, R. -T. Tjeung, N. De Rooij

We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were conducted to look at the effects of load applied, embossing temperature and embossing time on the fidelity of line arrays repre

D. Fabrègue, Nicolas André, T. Pardoen, J. P. Raskin

A new concept of micromachines has been developed for measuring the mechanical properties of thin metallic films. The actuator is a beam undergoing large internal stresses built up during the deposition process. Al thin films are deposited partly on the actuator beam and on the substrate. By etching the structure, the actuator contracts and pulls the Al film

V. Rochus, J. -C. Golinval, C. Louis, C. Mendez

The aim of this paper is to deal with multi-physics simulation of micro-electro-mechanical systems (MEMS) based on an advanced numerical methodology. MEMS are very small devices in which electric as well as mechanical and fluid phenomena appear and interact. Because of their microscopic scale, strong coupling effects arise between the different physical fiel

A. Molfese, A. Nannini, F. Pieri

Reduced-Order Modelling of the Bending of an Array of An array of micromirrors for beam steering optical switching has been designed in a thick polysilicon technology. A novel semi-analytical method to calculate the static characteristics of the micromirrors by taking into account the flexural deformation of the structure is presented. The results are compar

Ruey-Fang Shyu, Hsiharng Yang, Wen-Ren Tsai, Jhy-Cherng Tsai

This paper presents a simple method to fabricate micro-ball lens and its array. The key technology is to use the hydrophobic characteristics of polyterafluoroethylene (PTFE) substrate. High contact angle between melted photoresist pattern and PTFE can generate micro-ball lens and its array. PTFE thin film was spun onto a silicon wafer and dried in oven. Phot

D. Bouyge, D. Sabourdy, A. Crunteanu, P. Blondy

We present a simple technique to produce active Q-switching in various types of fiber amplifiers by active integration of an electrostatic actuated deformable metallic micro-mirror. The optical MEMS (MOEMS) device acts as one of the laser cavity reflectors and, at the same time, as switching/ modulator element. We aim to obtain laser systems emitting short,

M. Woytasik, J. -C. Ginefri, J. -S. Raynaud, M. Poirier-Quinot

In Magnetic Resonance Imaging (MRI), to achieve sufficient Signal to Noise Ratio (SNR), the electrical performance of the RF coil is critical. We developed a device (microcoil) based on the original concept of monolithic resonator. This paper presents the used fabrication process based on micromoulding. The dielectric substrates are flexible thin films of po

Hsiharng Yang, Chung-Tze Lee

This paper presents a new research study on the platform fabrication of fluorescence bio-detection chip with an optical fiber transmission. Anisotropic wet etching on (100) silicon wafers to fabrication V-groove for optical fiber alignment and micro-mirror were included. Combing with anodic bonding technique to adhere glass, silicon structure and optical fib

Gy. Bognar, V. Szekely, M. Rencz

In this paper the feasibility study of an IR sensor card is presented. The methodology and the results of a quasi real-time thermal characterization tool and method for the temperature mapping of circuits and boards based on sensing the infrared radiation is introduced. With the proposed method the IR radiation-distribution of boards from the close proximity

Jeong-Won Yoon, H. -S. Chun, Ja-Myeong Koo, Seung-Boo Jung

As an alternative to the time-consuming solder pre-forms and pastes currently used, a co-electroplating method of eutectic Au-Sn alloy was used in this study. Using a co-electroplating process, it was possible to plate the Au-Sn solder directly onto a wafer at or near the eutectic composition from a single solution. Two distinct phases, Au5Sn and AuSn, were

A. Frasca, K. Biazzo, G. Tas, S. Evren

We present the results of a contemporaneous photometric and spectroscopic monitoring of lambda And and II Peg aimed at investigating the behavior of surface inhomogeneities in the atmospheres of these active stars which have nearly the same temperature but different gravity. The light curves and the modulation of the surface temperature, as recovered from LD

A. -S. Rollier, M. Faucher, B. Legrand, D. Collard

This paper presents results about fabrication and operation of electrostatic actuators in liquids with various permittivities. In the static mode, we provide experimental and theoretical demonstration that the pull-in effect can be shifted beyond one third of the initial gap and even be eliminated when electrostatic actuators are operated in liquids. This sh

Hsien-Tsung Chang, Chia-Yen Lee, Chih-Yung Wen

A novel valveless micro impedance pump is proposed and analyzed in this study.

Ch. -Heng Chien, Hui-Min Yu

Thermalcycler were extensively used machine for amplify DNA sample. One of the major problems in the working time was that it spent most of time for cooling and heating. In order to improve the efficient, this study presented a novel method for amplify DNA sample. For this concept, the DNA sample in the silicon chamber which was pushed by a beam through thre

Zhang Yong, Zhu Jian, Yu Yuanwei, Chen Chen

This paper presents a micromachined bandpass filter with miniature size that has relatively outstanding performance. A silicon-based eight-order microstrip bandpass filter is fabricated and measured. A novel design method of the interdigital filter that can create two transmission zeros is described. The location of the transmission zeros can be shifted arbi

R. Hellin-Rico, J. -P. Celis, K. Baert, C. Van Hoof

This paper presents the different processing steps of a new generic surface micromachining module for MEMS hermetic packaging at temperatures around 180 degrees C based on nickel plating and photoresist sacrificial layers. The advantages of thin film caps are the reduced thickness and area consumption and the promise of being a low-cost batch process. Moreov

T. O'Donnell, C. Saha, S. -P. Beeby, M. -J. Tudor

This paper investigates how the power generated by electromagnetic based vibrational power generators scales with the dimension of the generator. The effects of scaling on the magnetic fields, the coil parameters and the electromagnetic damping are presented. An analysis is presented for both wire-wound coil technology and micro-fabricated coils.

Fei Duan, J. Jiao, Y. Wang

In this paper, CFD approach is used to simulate the thermal behavior in a sensitive high-Q gyroscope. The electromagnetically driving wires, in which AC current flows, are treated as Joule heat sources in the model. We found that the differences of temperature, pressure and velocity along the driving direction and transversely across the proof masses increas

S. -P. Beeby, M. -J. Tudor, R. -N. Torah, E. Koukharenko

This paper is concerned with generators that harvest electrical energy from the kinetic energy present in the sensor nodes environment. These generators have the potential to replace or augment battery power which has a limited lifetime and requires periodic replacement which limits the placement and application of the sensor node.

Yi Chiu, Chiung-Ting Kuo, Yu-Shan Chu

This paper presents a micro electrostatic vibration-toelectricity energy converter. For the 3.3 V supply voltage and 1cm2 chip area constraints, optimal design parameters were found from theoretical calculation and Simulink simulation. In the current design, the output power is 200 $μ$W/cm2 for the optimal load of 8 MΩ. The device was fabricated in a silicon

T. Sterken, P. Fiorini, R. Puers

Scaling down of electronic systems has generated a large interest in the research on miniature energy sources. In this paper a closer look is given to the use of vibration based scavengers in industrial environments, where waste energy is abundantly available as engine related vibrations or large amplitude motions. The modeling of mechanical generators resul

P. -D. Mitcheson, T. -C. Green, E. -M. Yeatman

Inertial energy scavengers are self-contained devices which generate power from ambient motion, by electrically damping the internal motion of a suspended proof mass. There are significant challenges in converting the power generated from such devices to useable form, particularly in micro-engineered variants. This paper presents approaches to this power con

P. Beirão, B. R. Brandl, P. N. Appleton, B. Groves

We present high spatial resolution (~ 35 parsec) 5-38 um spectra of the central region of M82, taken with the Spitzer Infrared Spectrograph. From these spectra we determined the fluxes and equivalent widths of key diagnostic features, such as the [NeII]12.8um, [NeIII]15.5um, and H_2 S(1)17.03um lines, and the broad mid-IR polycyclic aromatic hydrocarbon (PAH

E. Lefeuvre, A. Badel, C. Richard, L. Petit

This paper compares the performances of a vibrationpowered electrical generators using PZT piezoelectric ceramic associated to two different power conditioning circuits. A new approach of the piezoelectric power conversion based on a nonlinear voltage processing is presented and implemented with a particular power conditioning circuit topology. Theoretical p

Yasser Ammar, S. Basrour

Non-linear techniques are used to optimize the harvested energy from piezoelectric and electromagnetic generators. This paper introduces an analytical study for the voltage amplification obtained from these techniques. The analytical study is experimentally validated using a macro model of piezoelectric generator. Moreover, the integration influences on thes

J. Merino, M. Dumm, N. Drichko, M. Dressel

The dynamics of charge carriers close to the Mott transition is explored theoretically and experimentally in the quasi two-dimensional organic charge-transfer salt $κ$-(BEDT-TTF)$_2$Cu[N(CN)$_2$]Br$_x$Cl$_{1-x}$, with varying Br content. The frequency dependence of the conductivity deviates significantly from simple Drude model behavior: there is a strong re

Ja-Myeong Koo, Seung-Boo Jung

Interfacial reactions and shear properties of the In-48Sn (in wt.%) ball grid array (BGA) solder joints after bonding were investigated with four different surface finishes of the substrate over an underlying Cu pad: electroplated Ni/Au (hereafter E-NG), electroless Ni/immersion Au (hereafter ENIG), immersion Ag (hereafter I-Ag) and organic solderability pre

A. Bennis, C. Leinenbach, C. Raudzis, R. Müller-Fiedler

Using Rayleigh surface acoustic waves (SAW), the Young's modulus, the density and the thickness of polycrystalline Silicon-Germanium (SiGe) films deposited on silicon and SiO2 were measured, in excellent agreement with theory. The dispersion curve of the propagating SAW is calculated with a Boundary Element Method (BEM)-Model based on Green's functio

Gou-Jen Wang, Yi-Chin Lin, Gwo-Sen Lin

In this research, a novel contact resistance model for the flat panel display (FPD) packaging based on the within layer parallel and between layers series resistance concepts was proposed. The FJ2530 anisotropic conductive films (ACF) by Sony Inc. containing the currently smallest 3micron conductive particles was used to conduct the experiments to verify the

D. Allen, N. Duclos, I. Garbutt, M. Saumer

The process of nickel electroforming is becoming increasingly important in the manufacture of MST products, as it has the potential to replicate complex geometries with extremely high fidelity. Electroforming of nickel uses multi-component electrolyte formulations in order to maximise desirable product properties. In addition to nickel sulphamate (the major

P. Szabo, B. Nemeth, M. Rencz, B. Courtois

Our paper presents a non-destructive thermal transient measurement method that is able to reveal differences even in the micron size range of MEMS structures. Devices of the same design can have differences in their sacrificial layers as consequence of the differences in their manufacturing processes e.g. different etching times. We have made simulations exa

Ming-Tzer Lin, Chi-Jia Tong, Chung-Hsun Chiang

Microelectromechanical systems (MEMS) technologies are developing rapidly with increasing study of the design, fabrication and commercialization of microscale systems and devices. Accurate mechanical properties are important for successful design and development of MEMS. We have demonstrated here a novel electroplating spring frame MEMS Structure Specimen in

W. Faris, H. Mohammed, M. M. Abdalla, C. -H. Ling

In this paper, we study the behaviour of a microcantilever beam under electrostatic actuation using finite difference method. This problem has a lot of applications in MEMS based devices like accelerometers, switches and others. In this paper, we formulated the problem of a cantilever beam with proof mass at its end and carried out the finite difference solu

T. Pichonat, B. Gauthier-Manuel

Micro fuel cells ($μ$-FC) represent promising power sources for portable applications. Today, one of the technological ways to make $μ$-FC is to have recourse to standard microfabrication techniques used in the fabrication of micro electromechanical systems (MEMS). This paper shows an overview on the applications of MEMS techniques on miniature FC by present

M. -K. El Khatib, A. Pothier, P. Blondy

Recently the strong demands in wireless communication requires expanding development for the application of RF MEMS (Radio Frequency micro electro mechanical systems) sensing devices such as micro-switches, tunable capacitors because it offers lower power consumption, lower losses, higher linearity and higher Q factors compared with conventional communicatio

S. Oukassi, R. Salot, S. Bancel, J. -P. Pereira-Ramos

This work presents recent advances in the development and the integration of an electrochemical (chemicalelectrical energy conversion) micro power generator used as a high voltage energy source for RF-MEMS powering. Autonomous MEMS require similarly miniaturized power sources. Up to day, solid state thin film batteries are realized with mechanical masks. Thi

Geoffrey Sewell

We provide a brief survey of quantum statistical characterisations of order, disorder and coherence in systems of many degrees of freedom. Here, order and coherence are described in terms of symmetry breakdown, while disorder is described in terms of entropy and algorithmic complexity, whose interconnection has been recently extended from the classical to th

Guillaume Savelli, Marc Plissonnier, Jacqueline Bablet, C. Salvi

During recent years, microelectronics helped to develop complex and varied technologies. It appears that many of these technologies can be applied successfully to realize Seebeck micro generators: photolithography and deposition methods allow to elaborate thin thermoelectric structures at the micro-scale level. Our goal is to scavenge energy by developing a

X. -C. Shan, Z. -F. Wang, R. Maeda, Y. F. Sun

This paper reports on our research in developing a micro power generation system based on gas turbine engine and piezoelectric converter. The micro gas turbine engine consists of a micro combustor, a turbine and a centrifugal compressor. Comprehensive simulation has been implemented to optimal the component design. We have successfully demonstrated a silicon

J. Juillard, E. Colinet, M. Dominguez, Joan Pons

This paper is devoted to the analysis of resonant MEMS sensors based on discrete relay feedback techniques. One drawback of such techniques is that some synchronization usually occurs between the discrete part and the continuous part of the system: this results in sensor responses that are very similar to the curves known as devil's staircases, i.e. the

O. Français, M. -C. Jullien, L. Rousseau, P. Poulichet

Due to scaling laws, in microfluidic, flows are laminar. Consequently, mixing between two liquids is mainly obtained by natural diffusion which may take a long time or equivalently requires centimetre length channels. To reduce time and length for mixing, it is possible to generate chaotic-like flows either by modifying the channel geometry or by creating an

S. Spinner, J. Bartholomeyczik, B. Becker, M. Doelle

This paper reports on the systematic electromechanical characterization of a new three-axial force sensor used in dimensional metrology of micro components. The siliconbased sensor system consists of piezoresistive mechanicalstress transducers integrated in thin membrane hinges supporting a suspended flexible cross structure. The mechanical behavior of the f

A. Giridhar, F. Verjus, F. Marty, A. Bosseboeuf

This paper deals with a single-crystal-silicon (SCS) MEMS resonator with improved temperature stability. While simulations have shown that the temperature coefficient of resonant frequency can be down to 1 ppm/degrees C, preliminary measurements on non-optimised structures gave evidence of a temperature coefficient of 29 ppm/degrees C. Design, optimisation,

S. -P. Vudathu, K. -K. Duganapalli, Rainer Laur, D. Kubalinska

This paper considers a developing theory on the effects of inevitable process variations during the fabrication of MEMS and other microsystems. The effects on the performance and design yield of the microsystems devices are analyzed and presented. A novel methodology in the design cycle of MEMS and other microsystems is briefly introduced. This paper describ

Jing Li, L. Dedeng, Suntao Wu

Pb(Zr0.52Ti0.48)O3 (PZT) thin films were in situ deposited by pulsed laser deposition (PLD) on Pt/Ti/SiO2/Si substrates using a template layer derived by sol-gel method. A 0.1-$μ$m-thick PZT layer with (111) or (100)-preferred orientation was first deposited onto Pt/Ti/SiO2/Si substrates using the sol-gel method, and than a PZT layer with thickness of 1$μ$m

Tsung-Hung Lin, Hsiharng Yang, Ching-Kong Chao

This paper presents a simple and effective method to fabricate a polydimethyl-siloxane (PDMS) microlens array with a high fill factor, which utilizes the UV proximity printing and photoresist replication methods. The concave microlens array mold was made using a printing gap in lithography process, which utilizes optical diffraction of UV light to deflect aw

Hansjörg Seybold, José S. Andrade, Hans J. Herrmann

A new model to simulate the time evolution of river delta formation process is presented. It is based on the continuity equation for water and sediment flow and a phenomenological sedimentation/ erosion law. Different delta types are reproduced using different parameters and erosion rules. The structures of the calculated patterns are analyzed in space and t

Ying Li, Juan Hua

With heavy quark limit and hierarchy approximation $λ_{QCD}\ll m_D\ll m_B$, we analyze the $B\to D^0\bar D^0$ and $B_s\to D^0\bar D^0$ decays, which occur purely via annihilation type diagrams. As a roughly estimation, we calculate their branching ratios and CP asymmetries in Perturbative QCD approach. The branching ratio of $B\to D^0\bar D^0$ is about $3.8\

M. Dominguez, Joan Pons, J. Ricart, J. Juillard

This paper introduces a new feedback topology for the Pulsed Digital Oscillator (PDO) and compares it to the classical topology. The `classic' or single feedback topology, introduced in previous works, shows a strong behavior dependence on the damping losses in the MEMS resonator. A new double feedback topology is introduced here in order to help solving

C. Mendez, C. Louis, S. Paquay, P. De Vincenzo

MEMS devices are typical systems where multiphysics simulations are unavoidable. In this work, we present possible applications of 3-D self-assembled SOI (Silicon-on-Insulator) MEMS such as, for instance, thermal actuators and flow sensors. The numerical simulations of these microsystems are presented. Structural and thermal parts have to be strongly coupled

A. Phommahaxay, G. Lissorgues, L. Rousseau, T. Bourouina

Advances in material processing such as silicon micromachining are opening the way to vacuum microelectronics. Two-dimensional vacuum components can be fabricated using the microsystems processes. We developed such devices using a single metal layer and silicon micromachining by DRIE. The latter technological step has significant impact on the characteristic

J. Iannacci, Jason Tian, S. Sinaga, R. Gaddi

In RF-MEMS packaging, next to the protection of movable structures, optimization of package electrical performance plays a very important role. In this work, a wafer-level packaging process has been investigated and optimized in order to minimize electrical parasitic effects. The RF-MEMS package concept used is based on a wafer-level bonding of a capping sil

M. -A. Polosky, E. -J. Garcia

Over the last decade the successful design and fabrication of complex MEMS (MicroElectroMechanical Systems), optical circuits and ASICs have been demonstrated. Packaging and integration processes have lagged behind MEMS research but are rapidly maturing. As packaging processes evolve, a new challenge presents itself, microsystem product development. Product

Massimo Giovannini

A viable class of magnetogenesis models can be constructed by coupling the kinetic term of the hypercharge to a spectator field whose dynamics does not affect the inflationary evolution. The magnetic power spectrum is explicitly related to the power spectrum of (adiabatic) curvature inhomogeneities when the quasi-de Sitter stage of expansion is driven by a s

M. J. Bayarri, J. O. Berger, J. Cafeo, G. Garcia-Donato

A key question in evaluation of computer models is Does the computer model adequately represent reality? A six-step process for computer model validation is set out in Bayarri et al. [Technometrics 49 (2007) 138--154] (and briefly summarized below), based on comparison of computer model runs with field data of the process being modeled. The methodology is pa

Jiawei Zhang

The perfectly matched layers (PMLs), as a boundary termination over an unbounded spatial domain, are widely used in numerical simulations of wave propagation problems. Given a set of discretization parameters, a procedure to select the PML profiles based on minimizing the discrete reflectivity is established for frequency domain simulations. We, by extending

M. A. Braun

Nucleus-nucleus scattering is studied in the local Reggeon Field Theory in the quasi-classical approximation with non-eikonal boundary conditions corresponding to the Glauber picture at low energies. Comparison with the commonly used eikonal boundary conditions shows that the new conditions make both the action and nucleus-nucleus total cross-sections lower

B. Mogwitz, C. Korte, M. von Kreutzbruck, L. Kienle

The preparation of Ag 2+x Se thin films with thicknesses between 4 nm and 3000 nm by pulsed laser deposition on single crystalline NaCl and MgO substrates is reported. The films are perfectly dense and show a good lateral uniformity with a small number of defects. The microstructure of the films corresponds to a nanoparquet, being composed of two different p